Volume 1
17.4 MB, 14 entries.
← Back to open-source 3D-print projects · Robot Arms
Original author TomKnox · 作者未在 Printables 标注(原文以 GitHub 仓库许可为准)
TomKnox's Arduino arm is a complete-engineering project: the models are just the entry point — the living documentation lives in a GitHub repo.
We mirrored the assembly guide (9 MB), the bill of materials and the firmware archive into `extra/`, so you can build offline.
The license was not stated on Printables; we mirror it with attribution and non-commercial use. Contact the author for commercial use.
Now showing: English original
17.4 MB, 14 entries.
21.5 MB, 23 entries.
Download both volumes and extract them into the same folder for the complete package.
SHA-256: openhwlab-robotic-arm-models-part1.zip bfcf7d02a77d8077… · openhwlab-robotic-arm-models-part2.zip db2c6e22501a3e83…
| File | What it is | |
|---|---|---|
firmware.zip | Author-supplied file | ↓ Download |
0007-1000_robotic-arm_bom.pdf | Author-supplied file | ↓ Download |
0007-1000_assembly_guide.pdf | Author-supplied file | ↓ Download |
robotic-arm-bill-of-material.pdf | Author-supplied file | ↓ Download |
| Folder | Count | Files |
|---|---|---|
(根目录) | 32 | 0007-0505_idol-gear.stl 0007-0205_t2m1bi.stl 0007-0702_cover-axis3.stl 0007-0302_3m2c.stl 0007-0704_cover-axis4top.stl 0007-0202_2m2m.stl 0007-0403_4m2c.stl 0007-0103-1m2.stl 0007-0201_2m1.stl 0007-0701_cover-axis2.stl 0007-0504_gripper-right.stl 0007-0601_servo-gearbox.stl 0007-0204_t2m1bd.stl 0007-0602_fan-module.stl 0007-0507_servo-gear.stl 0007-0501_bottom-plate.stl 0007-0503_gripper-left.stl 0007-0304_t3m1c.stl 0007-0402_4m2.stl 0007-0508_top-plate.stl 0007-0801_feet.stl 0007-0301_3m1.stl 0007-0502_cylinder.stl 0007-0101-1m1.stl 0007-0303_3m2.stl 0007-0401_4m1.stl 0007-0703_cover-axis4.stl 0007-0506_pivot-arm.stl 0007-0603_suport-drivers.stl 0007-0404_t4m1e.stl 0007-0102-1m3.stl 0007-0203_2m2h.stl |
extra | 3 | firmware.zip 0007-1000_robotic-arm_bom.pdf 0007-1000_assembly_guide.pdf |
extra/Documentation | 1 | robotic-arm-bill-of-material.pdf |